Ask the Expert
Question-and-Answer Archive

by Ron Joseph

Search the Ask the Expert Archives
Enter a search term or phrase:

Browse the Archive by Topic
Environmental and Health Topics | Substrates | Materials and Equipment
Surface Issues | Standards, Measurement, and Calculations |See All Topics

Browse the Archive by Date
2001 | 2002 | 2003 | 2004 | 2005 | 2006 | 2007 | 2008 | 2009

 

Items from 2005

December, 2005

November, 2005

  • Repairing Epoxy Coating on Concrete
  • Alodine Conversion Coating of Aluminum
  • Liquid Wet Paint Vesrur Powder Coating
  • Solvent Resistance of Polyurethane
  • Electrostatic Spray Guns and Spray Painting
  • Establishing Color Standards
  • Solving Paint Cratering Problems
  • Chemical Resistance of Aerospace Polyurethane MIL-C-83286
  • Clear Coating Over Steel
  • Labels on Paint Cans
  • Paint Changes Color
  • Adhesion of Zinc Phosphate
  • Painting Over Concrete When Salt is Present
  • Airless Spray Gun for Painting Aluminum Boat
  • Is Benzyl Alcohol a VOC?
  • Powder Coating vs. Baked Enamel
  • Paint Dry Film Thickness on Car
  • October, 2005

  • Training Painters
  • When Do You Not Need to Report VOC
  • PMS and CIE
  • Designing for Air Velocity in Paint Spray Booth
  • Federal Standard Color Palette
  • Preparation and Coatings for Tile and Stairs
  • Chemfilm - Chromate Conversion Coating of Aluminum
  • Paint for Exterior Sculptures
  • Lighting in Spray Booths
  • Acrylic Paint
  • Applying Epoxy to Aluminum for Exterior Applications
  • Reflective Glass Beads for Road Marking Paint
  • Use of Silicone Sealer in Spray Booth Construction - Fish Eyes - Cratering
  • Replacing TT-E-527 with CARC Paint
  • Thermoplastic and Thermoset Paint Coatings
  • Selecting a Spray Gun
  • Green #383
  • Corrosion Protection at Steel - Aluminum Interface
  • Changing Filters in Spray Room Based on Pressure Differential
  • Corrosion Preventive Compounds
  • Intumescent Coatings, Flame Retardancy, Fire Retardant Coatings
  • Twin Arc Spray Coating Operation - Regulations
  • Orange Peel Paint Defect with HVLP Spray Gun
  • September, 2005

  • Covering Fluorescent Lights with Paint to Lesson Brightness
  • Polyurethane Enamel
  • CARC Paint Coating
  • External Mix Two Component Spray Guns
  • August, 2005

  • Color Changes (Color Shifts) in Paint Coatings
  • Paint Ingredients
  • CARC Powder Coatings
  • Touch Up Primers for CARC Topcoat
  • Cratering of Paint for Automotive Painting
  • Clear Paint Coating Over Copper
  • CARC Powder Coating
  • Powder Coating--Carbon Fiber Color Finish
  • House Paint Blistering on Masonry Walls
  • Calculating Spray Booth Emissions
  • Paint Standards for Painting Contractors
  • Painting Aircraft (Airplane)
  • Paint Chipping on Hood of Car (Automotive)
  • Mixing Epoxy Paint with Acrylic Paint
  • EPA and State Regulations on HVLP Paint Spray Guns (sprayers)
  • Colour (Color) Matching and Colour Differences with Touchup
  • Air Velocity - Air Flow Rate in Paint Spray Booth
  • Mixing Paint Manufacturers
  • Evaporation of Paint Solvents and Health Effects
  • Cell Phones in Paint Spray Room
  • What VOC Do You Report on an MSDS?
  • July, 2005

  • Clear Coat Over Gel Coat
  • Painting Acrylic Emulsion in Rainy Seasons
  • Removing Paint from an Old House
  • Paint Spray Booth Rules, Regulations & Guidelines
  • Zinc Phosphate Corrosion Protection
  • Why Measure Viscosity of a Paint Coating?
  • Definition of "Thin Coating" in EPA Regulations
  • VOC Exempt Solvents for Paint Coatings
  • Painting Concrete Floor
  • Adhesion of Powder Coating to Stainless Steel
  • Paint Peeling from Concrete
  • Electrogalvanic Corrosion Between Steel and Aluminum
  • VOC Abatement Control Devices for Small Painting Companies
  • Odor Abatement
  • Paint Detachment from Wood Composite
  • Spray Booth Permits
  • Orange Peel with Water Borne Paint
  • Painting Over Cadmium Plating
  • Encapsulating Lead Paint
  • Selection of Paint Spray Booth Fan
  • Painting Aluminum Aircraft Engine
  • Spray Painting CARC Coatings
  • Marring or Marking of Matte Paints
  • Epoxy & Polyurethane for Silicon Rubber
  • Pressure Differential (Pressure Drop) in Paint Hose
  • Removing Paint from Cast Iron Railings
  • June, 2005

  • Surface Preparation of Aluminum for Painting
  • Measuring Paint Coating Viscosity
  • Glare of Sunlight from Aluminum Tubing
  • Respirators for CARC Paint Coatings
  • Conversion of VOC from lbs/gal to g/L
  • Painting Storage Silos Containing Sulphur
  • Removing Paint from Concrete
  • Fire Protection in Powder Coating Booth
  • Spray Applying High Solids Coatings--Thinning
  • Automotive Paint Chipping
  • Primer for Painting Aluminum Aircraft--Strontium Chromate vs. Zinc Chromate
  • Converting Color Specifications to Pantone
  • Hammertone Finishes
  • Removing Stain in Painted Surface
  • Federal Standard 595 to RAL
  • Paint Spray Booth Filter Stages
  • Epoxy Primer Mil-P-53022, Type I vs. Type II
  • Preparation of Aluminum Rails for Painting
  • Converting a DuPont Number to a RAL Number
  • Application of Etch Primer Over Alodine Conversion Coating
  • Removing Oil Stain for Solar Panels
  • Humidity and Paint Performance
  • May, 2005

  • Applying PTFE
  • Installation of Small Spray Booth Permit
  • Applying CARC and MIL-C22750 Epoxy
  • Removing Paint from a Tin Roof
  • Stubborn Paint Removal
  • Emulsion and Latex Paint
  • Painting vs Coating Contractor
  • Determining Air Flow Rate for Paint Spray Gun
  • Converting Kreb's Stormer Viscosity to Seconds for Paint Coatings
  • Painting Over Powder Coating
  • High Efficiency HVLP Spray Guns
  • Automotive Clearcoat Poor Performance
  • Porcelain Enamel - Bath Tub Paint
  • Calculating Air Flow Rate (Velocity) in a Spray Booth
  • Stripping of Epoxy Paint
  • Spray Booth vs. Spray Room
  • Certifying a Paint Coating
  • Anti-Graffiti Coating
  • Painting Steel
  • April, 2005

  • What Does "RAL" Color Mean?
  • Clear Coating on Aluminum
  • Clearcoating Aluminum for Exterior Application
  • Coating Stainless Steel
  • CARC Coatings MIL-DTL-64159 Type II Waterborne
  • Paints Designed for Electrostatic Application
  • EP2105 Spraytech Airless Spray Gun
  • CARC Coating for Acid and Alkali Resistance
  • Selecting Narrow Spray Gun Gan Width
  • Calculating Retained Solvents in Paints
  • VOC Emissions--Paint Spray Booth/Oven Split
  • Corrosion of Dissimilar Metals
  • Making a Paint Reflective
  • March, 2005

  • Matching Texture of Powder Coatings and Liquid Paints
  • Epoxy Coating Loose Gloss
  • Definition of Exempt Solvents, (VOC)
  • Federal Standard 595 Colors
  • Zero VOC Coatings - Solvent and Waterborne
  • Principle of Measuring Dry Film Thickness
  • Why Does Paint Run on a Cold Surface (Substrate)?
  • Portable Paint Booth
  • Converting Federal Standard 595B Color to PMS Number
  • List of Hazardous Air Pollutants (HAP, HAPs)
  • Federal Standard 595B Color Cards
  • Painting a Rubber Tire
  • Validating the Shelf Life of a Paint Coating
  • Paint Coating Peeling from Plastic
  • Respirators for CARC Polyurethanes
  • Making Different Colors of Polyurethane
  • When do I need a Paint Spray Booth?
  • Epoxy vs. Enamel
  • Spray Booth Design
  • Infrared (Infra-Red) Oven for Painting System
  • Painting Concrete Block
  • Solvent Entrapment on Paint Coatings
  • USDA Food Grade Wall Paint Coating for Food Processing Plant
  • February, 2005

  • Fast Dry Lacquer
  • Federal Standard Paint Colors
  • Dust in Paint Finish
  • Zinc Chromate Primer vs. Red Oxide Primer
  • Wet Tape Adhesion Test
  • Blisters in Vinyl Film - Decals
  • Galvanic Corrosion - Zinc and Aluminum
  • Paint Blisters, (Pimples) in Automotive Refinishing Job
  • Foaming of Phosphate Surface Pretreatment Bath
  • Airless v. Air-Assisted Airless Spray Guns
  • Tex Cote
  • Corrosion of Dissimilar Metals
  • Safe Powder Coat Paint for Metal Parrot Cage
  • Waterborne v. Solvent Base Paints, Coatings and Primers
  • Airflow in Aircraft Paint Hanger (Spray Booth)
  • Converting RAL and Pantone colors to CIE Color Coordinates
  • DuPont Imron Paint From Europe
  • Intumescent Coatings
  • Calculating Static Pressure in Ductwork
  • Selecting Between Dry Filter and Waterwash Spray
  • Density vs. Viscosity
  • Powder Puffing and Surging
  • January, 2005

  • Calculating VOC Compliance for Navy Antennas
  • Painting Galvanized Surfaces
  • Dry Film Thickness of Inorganic Zinc Rich Primer
  • Flammability of Paint to Fed-Std 595a
  • Using a Burn Off Oven to Remove a PVC Coating from Plating Racks
  • Highly Acid Resistant Coating
  • Solvent Popping in MDF Wood Finishing
  • Wash Primer Improves Paint Adhesion on Aluminum Extrusions
  • Ageing Of Intumescent Coatings
  • Stripping Paint From Fiberglass
  • Aged Antique Look For Cabinets
  • Fire Sprinklers for Paint Spray Booths
  • Paint for Mailboxes
  • Surface Preparation for Painting a Small Plane
  • Wash Primer and Chemfilm
  • Coating an Exterior Front Door
  • Temperature and Viscosity
  • CARC Primers MIL-P-53022, MIL-P-53030, CARC Topcoats MIL-DTL-64159 and MIL-C-53039
  • Converting Fed. Std. 595 Color to Pantone and RAL
  • Paint Hydraulic Pump Volume Displacement
  • Acid Etch Wash Primer and Alodine or Chemfilm
  • Paint Estimating for Contractors
  • Exempt Solvents for Paints and Coatings
  • Solvents Used in the Navy 1965-1969
  • Intumescent Paint
  • ASI and ANSI Color Cards and Standards
  • Health and Safety--CARC Polyurethane Overspray
  • Cleaning Spray Booth Filters
  • DYI-Formulating Zinc Phosphate
  • Browse the Archive by Date
    2001 | 2002 | 2003 | 2004 | 2005 | 2006
    2007
    | 2008 | 2009 | 2010

    

    What's New | About PCRC | Compliance Assistance | Regulations | Technical Info | News | Homeowners | Search | Disclaimer | Home

    ©2012-2025 Paints and Coatings Resource Center