December, 2003

• Determining if Subject to MACT and NESHAPS
• CARC on Stainless Steel
• Spray Booth Testing
• Activator for Polyurethane Automotive Paint
• Non-Slip Floor Tiles
• Viscosity Calculations and Conversion
• Powder Film Thickness Measurement
• FED-STD-595 #34094
• Repainting a Concrete Floor
• Best Paints
• Paint Manufacturing
• Solvent Evaporation from Paint
• Paint Off Gasing
• Education on Paint Manufacturing
• HVLP Gun

November, 2003

• Vapor Corrosion Inhibitors
• Are VCIs Considered Coatings?
• Paint Removal from Aircraft Skin
• Automotive Paint for Interior Bedroom Walls
• Painting Raw Aluminum Louvers
• Starting a Painting Company
• Changing the Gloss of a Wood Finish
• Measuring Viscosity of Lacquers
• Booth Oven Splilt in Automotive Painting Operation
• Finding Mil-Specs and Federal Standard Specifications
• Finishing Wooden Cedar Chest
• Painting Over Dry Rot
• Intumescent Paint
• Measuring Dry Film Thickness on Aluminum Sand Castings
• Paint System Change on Aircraft Skin
• Eliminating Odors From Wood Cabinets
• Improving Efficiency of Automotive Paint Spray Operations
• Painting Over Formica
• Measuring Orange Peel Levels of Paint
• Painting Neoprene Rubber
• Application of Epoxy Coating at Low Temperature
• Powder Coating vs. Baked Coating

October, 2003

• Painting Aluminum Roof to Reduce Glare
• Painting Copper for Electrical Insulation
• Permits for Expanding Paint and Printing Facility
• Dry Film Thickness of Paints and Coatings
• Calculating Paint Coverage
• Avoid Tiger Striping or Striping of Paint Finish
• Federal Standard 595a Color Standard
• Repainting Old Tin Roof
• Painting Aluminum
• Volatile Compounds
• Converting Dry Film Thickness to Wet Film Thickness
• Difference between Zinc Plate, Zinc Chromate and Dichromate
• Removing Glue from Concrete Floor
• Vinyl Zinc Chromate Primer
• Amending Air Permits

September, 2003

• Clear Coating Over Epoxy Floor
• Powder and Wet Spray Booth
• Specified Paint Thickness
• Measuring Viscosity with Ford #4 Cup (Viscometer)
• Painting "Bricks" on New Concrete
• Teak Cleaning
• Comparison of House Paints
• Painting Plywood Floor
• Painting Aluminum Boat
• Painting Metal, Steel Doors
• Latex Paint - Industrial Hygiene - Health Risks
• Applying Nitrocellulose Lacquers - Spray Booth Fires
• Paint Viscosity Conversions
• Spray Booths and Water Based Coatings
• VOC in House Paint
• HVLP Sprayers and Transfer Efficiency
• Selecting High Quality House Paint
• New Paint Line - Permits and Regulations

August, 2003

• Intumescent Paint
• Air Changes in Spray Booth
• Specifications for Spray Booth Filters
• EPA Compliance Determinations
• Airflow (Velocity) in Spray Booth and HVLP Spray Guns
• Food Grade Epoxies
• Removing Mold From Paint
• Selecting House Paints
• Solvents to Clean Spray Equipment
• Painting Over Melamine Desk Top
• OXSOL 100 for Solvent Washing
• Non-Atomized Sprayer and Silicone
• Painting a Tin Roof
• Removing Paint from Cast Iron
• Exterior Home Paints

July, 2003

• Federal Standard (Fed Std) Color Cards
• Painting Polyolefins
• Painting Aluminum Siding
• Yellowing of Nitrocellulose Lacquer
• Buying a Paint Spray Gun
• Painting in Marine Environment Using Epoxy Coating
• Painting Concrete Block Walls
• Painting Aluminum
• Paint Spray Booth Air Velocity
• Passivation of 10/10 or 10/18 Steel
• Paint Failure Over Zinc-Rich Primer
• Airless Spray Gun Strainer
• Painting Steel Storage Tanks
• Paint Emissions From an Aircraft Spray Painting Operation
• Word War II Paint Specifications
• VOC Compliant Products
• Painting Wood for Marine Exposure
• Measuring Transfer Efficiency
• Measuring Viscosity of Coatings
• Spray Booth Problems

June, 2003

• Airless Paint Sprayer Problems
• Where to Download Milspecs
• Finishing Maple Wood Furniture
• Selection of Paint Spray Respirator
• Scratch Resistant Coating for Stainless Steel
• Concrete Paints & Coatings
• Painting a Mural on Concrete
• Oleoresinous Oil Based Paints
• Measuring and Specifying Dry Film Thickness
• FDA Approved Paints
• Plexiglass Cleaning/Restoration
• Painting Plexiglass Plastic
• Paints for Food Factory
• Painting a Bass Drum
• Zinc-Rich Primer vs. Zinc Metal Spray

May, 2003

• Temperature Resistance of Zinc Chromate Paints
• Paint Line Cleaners - Surface Pretreatment
• Powder Coating Defects - Pin Holing
• Evaluating Pretreatment Cleaners
• Paint Stripping (Removal) From Concrete
• Wood Finishing - Paint for Milled Wood
• Infra-Red Absorbing Coating
• Getting Rid of Odors
• Flushing Solvents in Fluid Hose of Spray Gun
• Preventing Mold in Bathrooms
• CARC Coatings
• Zinc-Rich Primers
• Scales for Paint Manufacturing
• Wet Spray Booth for Powder Coating
• Capture Efficiency of Waterwash Spray Booth
• Developing a Paint Finish Specification

April, 2003

• Pressure Setting for Spray Guns
• Spray Booth Design - Interlocking Doors
• Comparison of UV Resistant Paints
• Camouflage Paint
• Paint and Coating Dry Film Thickness
• Finishing Hardwood Floors
• Hexavalent Chrome, Wash Primers
• Painting Wooden Furniture
• Spray Booth Air Flow Rate
• Peelable Latex Coating for Spray Booths
• Painting New and Aged Concrete
• Painting Concrete Basement Floor
• Removing Exterior Latex Paint From Wall

March, 2003

• Coating for a Marine Environment
• Permits for Painting Buildings and Archetectural Structures
• Is there lead in automotive paints?
• Dry Film Thickness
• Painting Concrete
• Reflective Paint - Glass Beads
• Concrete Floor Coating for Medical Facility
• Painting Galvanized Steel Beams for Salt Water Environment
• Reflective Paint for Light Fixtures
• Interior Paints
• Safety & Health - Polyurethanes
• Health Hazards of Calcium Carbonate
• Painting Concrete Blocks - Chemical Coating
• Sour Paint Odor
• Transfer Efficiency, (Transfer Rate) of Paints and Coatings

February, 2003

• Protecting Steel Tubes with Zinc of Galvanizing
• Painting on Plexiglass
• Acid Etch Primer for Zinc Chromate, Iron Phosphate
• Surface Preparation for Zinc-Rich Primer
• Starting a Paint Contracting Business
• UV Resistant Coating for Wood
• Painting Over Smoke Residue
• Non-Chromate Primer for Composite and Aluminum Surfaces

January, 2003

• Epoxy Color Specification for Aerospace Component
• Spray Booth Filter Change - NESHAP
• Permitting Portable Spray Booths
• Question Concerning the publications Modern Paints and Coatings
• Lead in Paint
• Converting from Conventional to HVLP Spray Guns
• Quality of Interior House Paints
• Repairing Rusty Steel Flashing
• Acid-Etch Resistant Paint for Aluminum
• Curing Tme for Polyurethane Coated Floors

Browse the Archive by Date
2001 | 2002 | 2003 | 2004 | 2005 | 2006
2007 | 2008 | 2009 | 2010